纸张水份测定仪配置探头选型

配合Delmhorst P-2000及RDM-3P设计的各种类型的纸品用探针，适用于多种工作情况下的湿度测量。
                                                                                                                                              H-4/830-2
 

Electrode handle and 10" coaxial prod for measuring moisture content in bales.

电极手柄及10"同轴刺针可用作捆绑纸料的水分含量测量。
                                                                                                      
2-E

n>

Pin type, maximum penetration 5/16". Used on curved surfaces such as cardboard and paper tubes especially if of small diameter.

小针型，zui大刺入深度为5/16"。被用于探测弯曲的表面，例如纸卡板及纸管、纸卷，尤其适用于小直径纸料。
                                                                                                     
15-E

/span>
2-E

Pin type, with two rows of four pins each, maximum penetration 1/8". Penetration can be adjusted according to stock thickness by means of gauge block.

小针型，共两排，四支针每排，zui大刺入深度为1/8".刺入深度可根据被测物料厚度通过量块来自行调节。
                                                                                                      19-E

ndFragment--> /span>
2-E

Blade type for measuring of paper on skids. Blades are 5" long. Longer blades available on special order.

刀锋型，长5"，用作测量正在滑动的纸品。依照特别要求，可提供更长的刀锋。

43-E

Clamp type for testing thin sheet stock. The sample tested is compressed between two smooth discs.

夹持型，用作薄纸品的测量。测试过程中，被测样品通过两张光滑碟片被压缩。
                                                                                                      
55-E

Double roller type for measuring moisture content on a moving web

双滚轮型，用作测量正在运动中的网状纸品